There is nothing under the sun that is risk-free and roof repairs are no exception. They can be especially dangerous when a person is not very cautious. Slipping and falling off a rooftop usually causes major injury and sometimes even death. This article highlights the pertinent safety considerations in a Marietta home roof repairs.
According to the Occupational Safety and Health Administration (OSHA), falls are the third leading cause of death in all construction-related fatalities. Falls from ladders have the highest incidence related to any home maintenance besides slipping from unprotected rooftops. Following are things that should be taken into consideration by someone who will be working on these hazardous repairs:
You never want to leave the bare wood exposed to the elements outside. In fact, as soon as you tear away any shingles, it is recommended that you immediately cover with felt paper/tar and secure it in place. Never walk on a wet, bare wood rooftop because it can be extremely slippery.
Roofing contractors know firsthand at how slippery a rooftop can be. A rooftop doesn’t necessarily have to be wet for it to be slick. A roofing contractor usually brings a push broom to sweep down a rooftop before they start working on it. A professional roofing company knows the importance to safety and so should you.
The best fix for a worn shingle rooftop, is tin shingles. These are basically shingle sized pieces of tin that you simply slide under existing shingles in problem areas. Don’t nail them either. Just dab a little roofing plastic onto the back of each one, such that it will glue the tin shingle in place. Buy some sheet metal and cut them yourself.
Safety with Power Tools- When working on a rooftop with power tools, the person should protect their hands by wearing gloves that are sturdy and make sure that the power tools are plugged into an outlet with ground fault protection. In cases where the power tool is excessively noisy, using ear protection is recommended when the tool is in use.
Inaccessible Areas; There is a great danger when working in hard-to-access areas on tops of homes and any person should have the appropriate safety gear and protection. A safety harness is an important tool that allows a person to securely access those hard-to-reach areas of the rooftop. Learning the following important steps on how to properly use the harness can save a person’s life from the real threat of falling:
Read Instructions- Carefully read the manufacturer’s instructions and fasten the harness around the body accordingly. Make sure to get the correct fit for the harness. Wear Harness properly- Ensure that the harness is properly tightened for a snug fit. Get rid of loose or dangling straps as this may cause slipping. Secure Safety Rope Anchors- At the peak of the housetop, drill screws into rafters which will then make the anchors secure. The safety rope must be connected to the ring on the rooftop anchor.
Andrew B. Spates is a home improvement specialist who helps individual homeowners make the right choices to protect their home investment. If you are interested in learning more about How to find the Best Home Roof Repairs Company Marietta, GA he suggests you visit his friend’s to learn more.
Author: Andrew B. SpatesThis author has published 134 articles so far.